Step 1 of 4 25% Welcome to Kootenai Electric This application is designed for all service requests except if applying for a subdivision or apartment complex backbone. If you just moved into a new location and would like to transfer an existing service into your name, please email KEC or call (208) 765-1200. Below is a list of applicable fees, depending on the type of service requested. Payments for any applicable fees can be made by cash, check, Visa or Mastercard. $50 area light engineering fee This fee includes the cost to engineer and install the area light utilizing existing KEC infrastructure. $250 non-refundable engineering fee (applied towards the project) This non-refundable fee applies to requests that include but are not limited to low-density new construction which includes subdivision lot sizes greater than one-half acre or lots where transformers have not been installed. This fee also applies to requests for non-residential new construction as well as modifications of an existing service. Once an application is received, the applicant shall meet with a KEC staking technician, if required for the service, within 120 days or they may be required to re-apply and pay a new engineering fee. Feel free to contact our office please email KEC or call us at (208) 765-1200 and we will be happy to walk you through the process. Our office hours are Monday through Thursday, 7 a.m to 5:30 p.m Start HereType of Applicant(Required)-Select-IndividualBusinessType of Service Requested(Required)-Select-New ServiceModify Existing ServiceInstall an Area LightType of Dwelling(Required)-Select-Residential Single StructureMulti-Dwelling (apartment, duplex, etc.)Non-ResidentialArea lights must be attached to a KEC pole. If no KEC pole exists, the cost for installation will be at least $4,000. Prior to installation, the applicant must also sign a service agreement agreeing to accept service and pay the applicable monthly charges for at least five years and will continue for the duration the light is installed. Membership Status, Billing Responsibility, and Service AddressCurrent KEC member?(Required)-Select-YesNoBilling Responsibility(Required)-Select-Same as CurrentEnter New InformationUpdate Information(Required)-Select-This Service OnlyAll Services under MembershipCurrent Member AccountName on KEC Account(Required) First Last Email(Required) Phone(Required)Billing ResponsibilityName(Required) First Last Primary Phone(Required)Email Billing Address(Required) Address Address Line 2 City State AlabamaAlaskaAmerican SamoaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaGuamHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaNorthern Mariana IslandsOhioOklahomaOregonPennsylvaniaPuerto RicoRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahU.S. Virgin IslandsVermontVirginiaWashingtonWest VirginiaWisconsinWyomingArmed Forces AmericasArmed Forces EuropeArmed Forces Pacific ZIP Code DOB (or EIN/Tax ID if applying as a business)(Required)Choose Your Billing Due Date(Required)-Select-5th of every month15th of every month25th of every monthAdd co-applicant Add co-applicant Co-ApplicantName(Required) First Last Primary Phone(Required)Email(Required) DOB (MM/DD/YYYY) Day Month Year Service AddressA complete service address is required to process the application. If needed, a temporary address can be obtained from County Planning & Zoning departments: Kootenai County: (208) 446-1070 | Bonner County: (208) 265-1458 | Benewah County: (208) 245-2821 | Spokane County: (509) 477-3675 If applying for an irrigation timer or traffic signal, please list the cross streets as the service address.Service Address(Required) Street Address Address Line 2 Service City State AlabamaAlaskaAmerican SamoaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaGuamHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaNorthern Mariana IslandsOhioOklahomaOregonPennsylvaniaPuerto RicoRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahU.S. Virgin IslandsVermontVirginiaWashingtonWest VirginiaWisconsinWyomingArmed Forces AmericasArmed Forces EuropeArmed Forces Pacific Service Zip/Postal Code Property InformationLocated in Subdivision Yes No This field is hidden when viewing the formSubdivisionSubdivision NameLotBlock NumberThis field is hidden when viewing the form-Has Gate Code? Gate Code Gate CodeMulti-Lot Appendix (must attach to application on last page if applicable) The multi-lot appendix is used when applying for lots within a subdivision that are generally similar in size, have the same power requirements and are located in the same subdivision. Download Multi-Lot Appendix (PDF)Site UseConditioned Spacein square feetService Sizein Amps, 200 Amps is most common for residentialTemporary Service Needed? Yes No Electric Vehicle Charger? Yes No Site Generation(solar panels/wind turbines) None Solar Wind Please describe:KW size, number of panels or turbines, approximate location, etc.HVAC Electric Gas None Other Water Heater Electric Heat Pump Water Heater Electric Tankless Gas None Other Multi-DwellingsComplex Name(Required)Number of Buildings(Required)House Panels Per Building(Required)Electric Vehicle Charger Yes No Member-Owned Generation None Solar Wind Please describe:KW size, number of panels or turbines, approximate location, etc.Multi-Dwelling Appendix The multi-dwelling appendix is used when applying for service to an apartment building or other building with multiple dwellings. 1 form must be completed for each building being applied for. Multi-Dwelling Appending Form (PDF)Upload Completed Form(s)(Required)If you are applying for service for a multi-dwelling such as an apartment building or other building with multiple dwellings, please complete this form for each building being applied for. Drop files here or Select files Accepted file types: txt, pdf, doc, docx, xls, xlsx, Max. file size: 20 MB, Max. files: 10. Non-Residential PropertyPrimary Site UseConditioned Space (square feet)Monthly kWh Anticipated (kWh)Service Size (Amps)Electric Vehicle Charger Yes No Member Owned Generation None Solar Wind Please describe:KW size, number of panels or turbines, approximate location, etc.Voltage-Select-120/240 1-Phase120/208 3-PhaseThird Choice277/480 3-PhaseDon't KnowService-Select-OverheadUndergroundMotors Onsite Yes No Additional InformationState Licensed ElectricianPhoneEmail Street Lights(Required)-Select-YesNoLighting OptionsLED Cobrahead Style LED Cobrahead Style LED Town and Country Style LED Town and Country Style LED Box Style Light LED Box Style Light Example 1 Example Example 2 Example Example 3 Example Mounts on wooden or steel pole 50, 100, and 140 W equivalent Mounts on fiberglass pole 55 W equivalent Mounts on a bronze metal pole 73 W equivalentQty of LightsQty of LightsQty of LightsNearest equipment or AIN(Required)-Select-KEC MaplocProperty AINKEC Equipment Number(Required)Property AIN(Required)Any Additional Property Info KEC Should Know?Modification InformationHave You Met With an Electrician?-None-YesNoN/AService Change(Required)-Select-Upgrade ServiceOverhead to UndergroundRelocate MeterOther (Please Describe Below)Upgraded Service Size Amps(Required)Describe the modification(Required)Lighting OptionsArea lights must be attached to a KEC pole. If no KEC pole exists, the cost for installation will be at least $4,000. Prior to installation, the applicant must also sign a service agreement agreeing to accept service and pay the applicable monthly charges for at least five years and will continue for the duration the light is installed. Barndoor Style Barndoor Style LED Cobrahead Style LED Cobrahead Style Example 1 Example Example 2 Example Mounts on wooden pole 42 or 57 W equivalent Mounts on wooden or steel pole 50, 100, and 140 W equivalentQty of LightsQty of Lights EasementEasement Acknowledgement(Required) I understand a completed easement is not required to proceed with the application process. However, it will be required before service is energized unless Kootenai Electric determines otherwise.What is an easement? An easement is a right held by one property owner or entity to use the land of another owner for a limited purpose. An easement holder has an interest in the property for the specified use but does not own the land. Utility easements allow for system upgrades and maintenance. Why does Kootenai Electric need easements? KEC needs easements from property owners to construct our electric facilities to provide service to members. An easement secures our long-term ability to access the property, operate our facilities, manage vegetation, and make future system improvements in order to keep power flowing to our members. If you have any questions, feel free to contact us at (208) 765-1200 or by KEC Email. Please be aware that easements must be complete and recordable for a job to be released for scheduling.Warranty Deed Acknowledgement(Required) I understand a completed easement is not required to proceed with the application process. However, it will be required before service is energized unless Kootenai Electric determines otherwise.Warranty deed uploadPlease upload a copy of the warranty deed for the property where service is being requested and make sure the legal description is legible. One file only. Accepted file types: txt, pdf, doc, docx, ppt, pptx, odp, xls, xlsx, ods, Max. file size: 50 MB. Finalize Application KEC staff will contact the applicant regarding the applicable payment for the type of service being applied for and to schedule a site visit if required. Alternatively, applicant may contact us during regular business hours and make a payment. Payments for any applicable fees can be made by cash, check, Visa or MasterCard. 9014 West Lancaster Road Rathdrum, ID 83858 | (208) 765-1200 | KEC Email | Office Hours: Monday to Thursday 7 a.m. to 5:30 p.m. Applicant Information - a copy of the application will be emailed to the email address belowName(Required)CompanyJob TitlePrimary Contact Email(Required) Primary Contact Phone(Required)Terms of ServiceTerms of Service I agree to the terms of service.Site Plan A site plan will be required before we can process your application and schedule a site visit. Please attach a site plan to this application using the upload button below. If you are unable to upload a site plan now, complete the application and email a copy of the site plan to Our Team. Site plan examples can be found by selecting the View Site Plan Examples checkbox below Items noted on the site plan include, but are not limited to: Structures Driveways Septic/drain fields Wellheads Meter base (if not attached to structure) Please note, That AutoCAD files (viewable in AutoCAD 2020 or older) must be in a zipped folder to be uploaded.Consent I agree that a site plan must be provided before the application can be processed and before a site visit will be scheduled.+UploadMax. file size: 100 MB.View Site Plan Examples View Site Plan Examples Applicant Electronic Signature (Full Name)(Required)A signature above consents to the terms and conditionsCommentsThis field is for validation purposes and should be left unchanged.
